MediBurn can be used to eliminate medical waste with reliable, on site technology.

The MediBurn is easily and safely operated with minimal training required. No pre-use construction is required on site. MediBurn can be put in place and operated immediately.

MediBurn highlights
• Designed by specialists in portable systems.
• No on site construction.
• Minimal training for operators.
• Built for safe, easy operation with state of the art controls.
• Has dual chamber combustion and high exhaust temperatures in excess of 1000 degrees C.
• Preset cycle time automatically controls start up and shut down.
• Thermostatic temperature control insures efficient fuel consumption.

MediBurn is an innovative system for smaller facilities. It has been designed to eliminate hospital waste (including infectious and pathological waste) efficiently, and with a minimum of expense. Existing personnel can be instructed on the use of this product. The operator opens the primary chamber door, places the waste inside and turns on the unit. A timed cycle preset by the operator begins and the waste is reduced to 5% ash by volume.

Specifications
Weight:	2000 lbs. (907kg)
Height:	82" (208cm) without stack 100" (254cm) with stack
Width:	34" (86cm)
Length:	62" (157cm)
Primary Chamber Volume:	10.5 cu .ft. (.28 cu/m)
Suggested Load Volume:	8 cu.ft/load (.22cu/m) load
Capacity:	Up to 330 lbs (150kg) per 8 hour day
Diameter of Stack:	12" (30cm) OD
REQUIREMENTS
Electrical:	110v/220v
Fuel:	Diesel
Location:	Level surface 7' (2 meters) from nearest structure
FUEL AND POWER CONSUMPTION
Electrical:	.35 Kw/hr
Fuel:	2.4 gal (9 L) - 30 min. cycle
	5 gal (18 L) - 1 hr. cycle
	9.8 gal (37 L) - 2 hr. cycle

| MediBurn | SmartAsh | SmartHeat | Drug Terminator

Elastec/American Marine: 1309 West Main, Carmi, IL 62821 USA
Call us at (618) 382-2525 Fax (618) 382-3610 E-mail elastec@elastec.com
Updated September 2005. Copyright Elastec/AmericanMarine. All rights reserved.